- How many bags of concrete do I need for a fence post?
- Should I use concrete for fence posts?
- What is the cheapest fence to install?
- How big should a fence gate be?
- Should a fence gate swing in or out?
- Can you put a gate in your fence?
- Is 2 feet deep enough for fence posts?
- How much gap does a fence gate need?
- How do you price a fence job?
- How much should a fence gate cost?
- Should I use 4×4 or 6×6 fence posts?
- What is the legal height of a fence between Neighbours?
- How much does a 100 foot fence cost?
How many bags of concrete do I need for a fence post?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket.
Add concrete into the hole and around the 4” x 4”.
Depending on your climate, let concrete set up for 24 – 48 hours..
Should I use concrete for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. … Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.
What is the cheapest fence to install?
17 Cheap Ways to Fence In Your YardVinyl fencing. … Split rail and mesh. … Concrete fencing. … Barbed wire. … Living fences. … Lattice fencing. … Hog wire. Hog wire is one of the cheapest ways to fence a yard. … Chicken wire. A chicken wire garden fence is likely the best-known affordable fencing.More items…•
How big should a fence gate be?
We typically recommend that your gate area be no wider than four feet when building a single gate. Anything wider than that and you will need to measure and build a double gate, which meets in the middle.
Should a fence gate swing in or out?
A gate should always swing inward toward private space, not outward toward public space. The hinges can be placed on either side of a single gate. If the gate will swing into a sloping hillside, mount the hinges on the downhill post.
Can you put a gate in your fence?
You are totally within your rights to make a gate in your fence, but the council are completely entitled (if they notice it), to ask you never to open it. They may even send someone along to erect a new fence in front of your gate.
Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
How much gap does a fence gate need?
For gates with standard 2×4 framing and 4×4 posts, leave a 1/2- to 3/4-inch space between the latch post and the gate frame. On the hinge side, it will depend on the hardware you use. About 1/4 inch is usually sufficient. Oppostie sides are parallel when diagonals are of equal length.
How do you price a fence job?
How to price your fencing services, step-by-stepGet clear on the scope of work.Measure the fencing area.Estimate the material cost.Estimate labor costs.Calculate your overhead costs.Tally all costs.Calculate your margins for desired profit.
How much should a fence gate cost?
Installation of wood fence gates costs roughly $4 to $8 per linear foot (approximately $20 to $60 for a single gate and $50 to $125 for a double gate).
Should I use 4×4 or 6×6 fence posts?
6×6 is overkill for sturdiness. 4×4 is the standard. And if you do it as a privacy fence, 6×6 posts stand out and make it look more substantial.
What is the legal height of a fence between Neighbours?
2 metresDebating over boundary fence height between neighbours may not always give birth to productive solutions. You are aware that the legal height limit for a fence is no more than 2 metres.
How much does a 100 foot fence cost?
Yard Fence Costs Per FootLinear FootCheaper (Wire or Electric)Moderate (Wood)8$10 – $50$100 – $200100$100 – $600$1,000 – $2,000150$150 – $1,000$1,500 – $3,000300$300 – $1,800$3,000 – $6,0001 more row