Quick Answer: What Does 5w 30 Oil Mean?

What happens if you use the wrong car oil?

The brand of motor oil matters little, but its viscosity grade (10W-30, for example) is important.

Using the wrong oil can lead to reduced lubrication and shorter engine life.

If the manual says to use synthetic oil, do so..

What happens if I use 5w40 instead of 5w30?

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to temperatures of 50°C, as opposed to 30°C.

Can you mix 5w 30 and 5w 40 oil?

5W30 and 5W40 oils can be mixed. For example, if you have a sharp drop in the fluid level on the road and there is no supply of 5W40 synthetics, but there is a similar fluid with a similar label and markings, but from an outside manufacturer, in this case, your manufacturer’s 5W30 oil will help you.

When should I use 5w30 oil?

At operating temperatures, both oils will have the same viscosity (30) and will flow and protect identically. If the oil will be in the engine during winter and you live in a place where it gets cold during these months, use 5w30 oil. If it will only be in the engine during the summer, use 10w30.

Is there a difference between SAE 30 and 5w30?

SAE 30 is a single viscosity motor oil. Only multi viscosity motor oils only should be used in any car. … 5W30 is motor oil that is thinner when cold than 30 weight motor oil and thicker than 5 weight motor oil when hot.

What is 5w 40 oil used for?

Ideal for starting engines at low temperatures and effective at high engine temperatures, 5w40 engine oils can be used in most conditions.

Is 5w30 oil synthetic?

When it’s brand new, a 5W-30 conventional motor oil acts exactly like a 5W-30 synthetic motor oil. Over time, however, the chemical additives used in the conventional oil to alter its properties begin to break-down, vaporize, or get used up.

What will happen if you put 10w30 instead of 5w30?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

Is Thicker oil better for high mileage cars?

High-mileage motor oil doesn’t hurt and it could prevent leaks from starting. … Some mechanics recommend switching to a thicker (higher viscosity) oil — such as 10W-30 full synthetic oil instead of 5W-20 full synthetic — or using oil additives to stop leaks.

Should I use 5w20 or 5w30?

Most often, these types of oils best cover the range of possible temperatures, with a 5W-20 oil more geared toward colder climates and a 5W-30 oil more appropriate for warmer temperature extremes. For the most part, either one should work just fine in a vehicle engine regardless of the prevailing temperatures.

Will thicker oil damage my engine?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

Can you mix different brands of oil in a car?

Even if two different brands of oil have the same viscosity, you still should not be mixing them together. … Technically, using a grade of oil that’s recommended by your car manufacturer is correct. However, if you combine two different brands of motor oil, you could be at risk of damage.

Does it matter what 5w30 oil I use?

If your car takes 5w30 oil and you put 5w30 oil in it, it’ll be fine. Totally wrong, these days the spec compliance of an oil is often more important than the viscosity. Don’t put any 5w30 in, put the correct 5w30 in.

Can you put 5w 40 oil in a 5w30 engine?

If you are racking your brain to choose between 5w30 and 5w40, we recommend you go with 5w30. However, if it is too expensive or not available for use, you can always go with the 5w40, which is just as good and will not cause any damage to the engine parts.

Will 5w20 hurt a 5w30 engine?

Probably not. 5w20 oil is fairly light oil and is generally designed to work with newer engines. Motor oil has become part of a manufacturers program to allow engines to get higher fuel mileage. Lighter oils take less HP to pump through an engine than heavier oils.

Can I mix 5w 30 and 10w30?

Yes, if topping up. If your oil must be topped up, then you are burning oil already, so the difference won’t cause more damage than is already there. 5W30 and 10W30 are essentially the same at operating temperature.

What happens if you put 5w20 in a 5w30 car?

If you put in 5W-30 oil instead of 5W-20 when the latter is the grade suggested by your vehicle’s manufacturer, damage to internal engine parts can occur. Additionally, your engine may experience performance issues such as diminished fuel economy and horsepower.

What happens if I use 0w20 instead of 5w30?

0w-20 is simply a different viscosity of oil. It won’t be an advantage to your engine if your manufacturer suggests you use 5w-30 and may indeed be a detriment to your engine. 0w-20 may be a recommended oil for certain conditions for your engine and may not be recommended for your engine.

Is it bad if I use 5w30 instead of 5w20?

Recommended Services Hello. Using 5W30 oil for your vehicle will not blow out the engine. However, your vehicle will not run as efficiently as it should and you may experience a loss of fuel economy.

Which oil is thicker 5w30 or 5w40?

Viscosity This term is defined as how well the liquid will flow through the engine. The working viscosity of 5w30 is basically from 9.3 to 12.5mm2/s whereas the operating viscosity of 5w40 is 12.5 to 16.3mm2/s. That means 5w40 has larger viscosity than 5w30. So, 5w30 is better than 5w40.

What is the difference between 5w 30 and 5w 40 engine oil?

How 5w30 is different from 5w40? The most significant difference between the two engine oils is the viscosity of these oils in hot temperatures. While 5w30 is much suitable to use in cold temperatures, the 5w40 is better for hot temperatures.