Quick Answer: Where Is Rim Size Located?

Can I use 55 tires instead of 60?

If you use 55 instead of 60 your tires will be a little more low profile than normal.

Yes, but rims size is the same (16”), which means that the tire will be a bit smaller in diameter since its wall is smaller.

Your tire sidewall would be a little thinner, and it might affect your speedometer accuracy..

How do I tell what brand my rims are?

How to Identify an Alloy Wheel BrandInspect the wheel cap. The cap is the part that covers the car’s hub where it comes through the center of the wheel. … Inspect the rim of the wheel. … Turn the wheel over so that the back can be inspected. … Look for a logo or the name of a wheel manufacturer imprinted on the back of the wheel.

What number on a tire is the rim size?

The two-digit number that usually follows the tire’s section width tells us the aspect ratio, or tire profile measurement. In this example, the 45 indicates that the sidewall distance, from the wheel rim to the outside of the tread, is 45% of the section width.

Can I use 235 tires instead of 225?

Obviously, you will need a certain kind of tire depending on how you use your vehicle. Due to this, a 235 tire might not be better than a 225 tire, or vice versa, but depending on your situation, one tire might serve you better than the other.

Can I use 225 tires instead of 215?

Unless you’re exploring the limits of the car’s performance, most drivers probably wouldn’t notice a difference between a 225 and a 215, all else being equal. If the outer circumference is a little different, the speedo may be a tiny bit off.

Do rims have serial numbers?

Located on the inside of the wheels, there is a series of markings, numbers and lettings you are going to find. … There is a surprising amount of information used in describing a tire and the wheels such are OEM, serial part, manufacturer etc. All of this is very important.

Are all 4 bolt rims the same?

Not all 4 stud wheels are the same Pitch Circle Diameter (PCD) although a 100 PCD is most common. Use this wheel suppliers site and key in each of the two cars and you’ll that Acura wheels should mount on the Rio.

How do I know if my rims are aluminum or alloy?

Steel is magnetic and aluminum isn’t, so any magnet will tell the tale if the wheel is steel. If the magnet doesn’t stick, then the wheel is either aluminum or magnesium.

Are all 16 inch rims the same?

Wheel dimensions are measured in diameter (15,16-17-inches, etc.) … Replacement wheels that are the same size as stock should go on without a problem. You can fit larger diameter and wider wheels, but you may run into clearance issues.

How do I find out my rim size?

Locate the stamped size on the back of the hub on the rim. This is the assigned measured size of the rim, and it is broken into three sizes: diameter, width and bolt pattern. For example, a 14 by 6 by 4.5 reading on the rim indicates that the diameter of the rim is 14 inches, and it will accommodate most 14-inch tires.

How do I identify my rims?

Inspect the rim of the wheel. The rim is the outer part of the wheel (not the center), and manufacturers like BBS often have their logo molded into the rim for identification. Also inspect the area around the lug holes where the wheel is fastened to the car. Often there will be a logo or company name there as well.

Is tire size the same as rim size?

Tires are a part of the wheel setup. For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size. That being said, a vehicle with bigger rims will often be able to fit larger tires than other vehicles.

What is J in rim size?

tyre bead profileThe letter “J” means a tyre bead profile. This is the marking used to define the wheel collar profile you should never ignore. Wheel collars and tyres must be compatible.